RV & Van Life
Living and working from a vehicle, on solar and alternator charging
Anker · Extra large
Anker SOLIX E10 Specs, Price & Buyer Notes
6 kWh of storage, 7.7 kW of continuous AC output, listed at $4,599. That works out to $0.77 per watt-hour and 99.0 watt-hours per pound. Spec figures below are taken from Anker’s own product page; WattPicks editors are deep-use experience reviewers, not a pretend third-party lab for every SKU.
6 kWh7.7 kW AC60.6 lbLiFePO4
What this unit is for
We have not yet written a positioning profile for this brand.
Best suited to: General portable power.
Multi-day backup, off-grid and whole-home loads.
Where to buy
A tracked retailer link appears here only when we have a resolved offer for this model. We do not send readers to a manufacturer store page we cannot attribute.
Safety: lithium power stations store a lot of energy. Follow Anker’s charge, ventilation, and storage instructions. WattPicks does not certify electrical installs.
Specifications
4 of 19 fields are published by Anker for this model. The rest are shown as “—” and are excluded from rankings rather than estimated.
| Rated Wh (nameplate) | 6 kWh |
|---|---|
| AC output (continuous) | 7.7 kW |
| AC surge | — |
| Power lifting / boost | — |
| Battery chemistry | LiFePO4 |
| Rated cycles | — |
| Weight | 60.6 lb |
| AC recharge to full | — |
| Max solar input | — |
| AC outlets | — |
| USB-C ports | — |
| USB-A ports | — |
| 12V car port | — |
| UPS switchover | — |
| Max expandable capacity | — |
| Warranty | — |
| Noise level | — |
| Ingress protection | — |
| Operating temp (low) | — |
| List price | $4,599 |
Where these numbers come from. WattPicks does not test power stations — this is a spec profile, not a review. Every figure on this page is taken from Anker’s own product listing and is stored with the vendor’s exact wording, reproduced below. We do not estimate missing specs — a field the vendor does not publish is shown as “—” and excluded from rankings. Source: Anker listing on Amazon.
Vendor wording for each figure (4)
capacityWh: “from title/listing (6000 Wh)”acOutputW: “7680”chemistry: “LiFePO4”weight: “60.6 pounds”
Anker SOLIX E10 specs FAQ
What are the Anker SOLIX E10 specs?
6 kWh capacity; 7.7 kW continuous AC; 60.6 lb; LiFePO4; listed at $4,599. 4 of 19 fields are published by Anker on the product page we read.
How long does the Anker SOLIX E10 last?
The vendor does not publish a cycle rating for this model on the page we read. Runtime is still capacity ÷ load; chemistry and duty cycle decide calendar life.
Can the Anker SOLIX E10 charge from solar?
No maximum solar input is published on the product page we read, so we cannot state a solar ceiling for this model.
Is the Anker SOLIX E10 good value?
At the published list price it works out to $0.77 per watt-hour. Compare that figure on our cost-per-watt-hour ranking rather than price alone.
Still sizing the purchase? How much capacity do I need · Solar charge time · Jackery vs EcoFlow vs BLUETTI
Where it ranks
Specs table →Position among all 134 power stations we track, in each dimension this unit publishes the inputs for.
| Dimension | Rank | Value |
|---|---|---|
| Best value (cost per watt-hour) | #89 of 134 | $0.77 |
| Most portable (Wh per pound) | #1 of 128 | 99.0 Wh/lb |
| Most inverter headroom | #66 of 134 | 128 W/100Wh |
| Most output per dollar | #85 of 134 | 1.67 W/$ |
Fits these buying scenarios
All use cases →Off-Grid & DIY Solar
Cabins, sheds, job sites and self-built systems
Elsewhere in the Anker range
All Anker models →
Closest rivals by capacity
Other brands’ models nearest in capacity — the units a buyer is most likely to be comparing against this one.
