5–1 on 10 shared metrics

Anker SOLIX C1000 Gen 2 vs BLUETTI Elite 100 V2

On 10 shared published metrics the C1000 Gen 2 leads 5–1. Capacity is nearly matched (1.02 kWh vs 1.02 kWh), so the decision turns on the rows below — not size. Choose C1000 Gen 2 when you will move the unit often — it leads on weight and watt-hours per pound.

C1000 Gen 21.02 kWh · $799 list · as of 2026-10-20

Check Price on Amazon

Elite 100 V21.02 kWh · $899 list · as of 2026-10-17

Check Price on Amazon

Carry / campingC1000 Gen 2
Heavy AC loadsC1000 Gen 2
Value per WhC1000 Gen 2
Solar rechargeElite 100 V2

Who wins which job

Pick C1000 Gen 2 when

Anker SOLIX C1000 Gen 2

Continuous AC output: 2,000 W vs 1,800 W
Weight: 24.9 lb vs 25.0 lb
List price: $799 vs $899
Cost per watt-hour: $0.78 vs $0.88

Buyers who want a well-made, well-supported unit and will use the app.

Pick Elite 100 V2 when

BLUETTI Elite 100 V2

Max solar input: 1,000 W vs 600 W

Buyers who measure value in watts and watt-hours, not in grams and app screens.

Spec by spec

A green mark is the better published figure on that row. Blank cells mean the vendor did not publish the number — we do not estimate.

Metric	C1000 Gen 2	Elite 100 V2	What it means
Capacity	1,024 Wh	1,024 Wh	How much energy the unit stores. Sets how long everything else can run.
Continuous AC output	2,000 W	1,800 W	The largest load the inverter will run continuously, not counting surge.
Weight lower is better	24.9 lb	25.0 lb	The spec buyers most often regret ignoring.
List price lower is better	$799	$899	Hub catalogue list price (same figure as product pages). Historical lows stay off this column.
Cost per watt-hour lower is better	$0.78	$0.88	Price divided by capacity. The fairest single value metric.
Watt-hours per pound	41.1 Wh/lb	41.0 Wh/lb	Capacity you get per pound carried.
Max solar input	600 W	1,000 W	Caps how large an array is useful, and therefore off-grid recharge speed.
AC recharge time lower is better	49 min	—	Vendor-stated time to full from a wall outlet.
Rated cycles	4,000 cycles	4,000 cycles	Vendor claim for charge cycles before capacity degrades to 80%.
UPS switchover lower is better	10 ms	10 ms	How long the unit takes to switch to battery. Under 20 ms keeps a desktop alive.
Warranty	60 months	60 months	Stated warranty length from the vendor listing.

How each one ranks overall

Anker SOLIX C1000 Gen 2

#34 of 51 for Best value (cost per watt-hour) ($0.78)
#14 of 50 for Most portable (Wh per pound) (41.1 Wh/lb)
#8 of 51 for Most inverter headroom (195 W/100Wh)
#7 of 25 for Fastest AC recharge (1.3 kW)
#22 of 40 for Highest solar input (600 W)
#21 of 42 for Longest service life (4096 kWh)
#19 of 51 for Most output per dollar (2.50 W/$)
#7 of 25 for Best for home backup (76/100)
#25 of 51 for Longest warranty (60 mo)
#2 of 22 for Quietest under load (20 dB)

BLUETTI Elite 100 V2

#38 of 51 for Best value (cost per watt-hour) ($0.88)
#16 of 50 for Most portable (Wh per pound) (41.0 Wh/lb)
#12 of 51 for Most inverter headroom (176 W/100Wh)
#13 of 40 for Highest solar input (1 kW)
#22 of 42 for Longest service life (4096 kWh)
#29 of 51 for Most output per dollar (2.00 W/$)
#12 of 25 for Best for home backup (73/100)
#30 of 51 for Longest warranty (60 mo)
#16 of 22 for Quietest under load (30 dB)

The brands behind them

Anker SOLIX

The existing Anker customer upgrading from power banks and chargers

Best for: Buyers who want a well-made, well-supported unit and will use the app.

Not for: Off-gridders who need the widest accessory ecosystem or the lowest cost per Wh.

All Anker SOLIX models →

BLUETTI

The value-and-power buyer who does not mind a heavy box

Best for: Buyers who measure value in watts and watt-hours, not in grams and app screens.

Not for: Buyers who need the lightest possible unit or the simplest possible interface.

All BLUETTI models →

Looking past the C1000 Gen 2 vs Elite 100 V2 head-to-head? Our Anker SOLIX vs BLUETTI brand comparison covers both line-ups.

Where these numbers come from. WattPicks does not test power stations — this is a spec profile, not a review. Every figure on this page is taken from Anker SOLIX’s own product listing and is stored with the vendor’s exact wording, reproduced below. We do not estimate missing specs — a field the vendor does not publish is shown as “—” and excluded from rankings. Source: ankersolix.com.

Vendor wording for each figure (8)

capacityWh: “Capacity => 1,024Wh”
acOutputW: “2,000W continuous power, 3,000W peak output”
weight: “Net Weight => 24.9 lb”
solarInputW: “600W Max Solar Input”
rechargeAcMinutes: “100% recharging in 49 minutes”
cycleLife: “After 4,000 cycles, the battery still has at least 80% capacity.”
upsSwitchoverMs: “10 ms UPS Backup”
warrantyMonths: “"warranty":{"label":"Warranty","value":"5 Years"}”

Where these numbers come from. WattPicks does not test power stations — this is a spec profile, not a review. Every figure on this page is taken from BLUETTI’s own product listing and is stored with the vendor’s exact wording, reproduced below. We do not estimate missing specs — a field the vendor does not publish is shown as “—” and excluded from rankings. Source: bluettipower.com.

Vendor wording for each figure (7)

capacityWh: “1,024Wh (20Ah)”
acOutputW: “1,800W In Total, 120V, 15A”
weight: “11.5kg (25lbs)”
solarInputW: “1,000W Max., 12V-60V, 20A Max.”
cycleLife: “4,000+ Cycles to 80% Original Capacity”
upsSwitchoverMs: “≤10 ms”
warrantyMonths: “And it comes with a 5-year warranty for peace of mind.”

Frequently asked

Which is better for most buyers, the Anker SOLIX C1000 Gen 2 or the BLUETTI Elite 100 V2?

The C1000 Gen 2 leads 5–1 on shared published metrics. That edge matters when continuous ac output, weight, list price match what you need; otherwise take the Elite 100 V2.

I care most about carry / camping — which should I buy?

Choose C1000 Gen 2 when you will move the unit often — it leads on weight and watt-hours per pound.

Method and sources

Every row on this page is a published manufacturer figure from the WattPicks catalog at build time. WattPicks does not run laboratory tests on these units, and blank cells mean the vendor did not publish that metric — not that we estimated it.

Read our methodology for how the catalog is normalized, and about WattPicks for who publishes it.